Game Gallery Amusements

How we recondition your pinball machine.

Here's what we do to make sure that your machine looks and plays like new!

THE UPPER PLAYFIELD
Dismantle all ramps, posts, ball guides and plastics.
Remove all light bulbs from the game.
Clean playfield - this comprises FOUR stages of cleaning and finally, finishing with Millwax.
Wash all plastics and clean all ramps, metal rails, posts.
Replace any defective jet bumper skirts/misc. parts.
Re-assemble top of playfield. - Replacing any blown or defective bulbs and all rubber rings.

BELOW THE PLAYFIELD
Remove all lamp boards and resolder the joints.
Clean lenses and bulbs.
Remove flipper assys, replace all coils, lockwashers, links, end stops, springs, bushings and where necessary, switches and base plates.
Replace flipper assys, carefully adjusting bat & shaft on upper side.
Remove any under ramps, ball poppers or anything that directly contacts the ball and clean thoroughly and replace.
Replace any defective targets.
Remove any defective wiring and re-solder terminals.
Vacuum out cabinet.
Insert balls into machine and test.
Place game on playtest during which time any faulty or mis-adjusted switches are detected and adjusted.
Clean cabinet outside and touch-in any scratches.

Install new legs and leg bolts.. comes with 90 day parts warranty

# posted by Game Gallery Amusements and Rentals @ 2:09 PM